Installation

Installation Videos:

Battery Deck™

 Install Layout & Installation Instructions

Layout Instructions:

Step 1: Position your accessories onto the Battery Deck in the desired configuration.

Step 2: Insert carriage bolts through the bracket and each accessory. Place a flat washer over the bolt threads and loosely secure with a nyloc nut—tighten just enough to hold the accessory in place while still allowing for adjustment.

Step 3: IF NEEDED Apply the included adhesive-backed spacers to the outer edges of the bracket, ensuring they do not interfere with the carriage bolts.

Installation Instructions:

⚠️ Important: Always disconnect your battery before beginning installation to prevent short circuits or electrical hazards.

Step 1: Disconnect the battery, starting with the ground cable first.

Step 2: Carefully place the Battery Deck on top of the battery, avoiding any direct contact with the battery terminals.

Step 3: Your kit will come with 8 total tension hooks to hold down the battery deck on your battery. Choose what 4 will work best to hold the battery deck onto your battery. In  most cases 1 tension hook on each side of the battery deck is enough to safely secure your battery deck to your battery. For the most secure mounting we recommend 2 tension hooks on each end of the battery deck.

Step 4: Insert the tension hooks through the designated slots on the Battery Deck and attach them to the battery cap or side rails, as applicable.

Step 5: Install a flat washer and nut onto each hook and snug them down to secure the bracket.

Step 6: Make any final adjustments to the mounted accessories, then fully tighten all nuts and bolts. You can connect any accessory wiring as needed.

Step 7: Reconnect the battery cables, beginning with the ground cable first.

For video instructions, please check out our YouTube: @thebracketbrosnw